Supplément au Journal de Physique Colloques

KEYNOTE LECTURE TO THE FOURTH Al-Li CONFERENCE p. C3-1

J.P. ROEDER

DOI: https://doi.org/10.1051/jphyscol:1987301

PROGRESS TO ALUMINIUM-LITHIUM SEMI-FABRICATED PRODUCTS p. C3-11

R. GRIMES, T. DAVIS, H.J. SAXTY and J.E. FEARON

DOI: https://doi.org/10.1051/jphyscol:1987302

ALITHALITE ® ALLOY DEVELOPMENT AND PRODUCTION p. C3-25

P.E. BRETZ

DOI: https://doi.org/10.1051/jphyscol:1987303

STATUS REPORT ON THE DEVELOPMENT OF ALUMINIUM-LITHIUM AT PECHINEY p. C3-33

G. LE ROY, R. MACE, D. MARCHIVE, P. MEYER, R. NOSSENT and F. SCHLECHT

DOI: https://doi.org/10.1051/jphyscol:1987304

ALUMINIUM-LITHIUM EXTRUSION p. C3-41

F. SCHLECHT, R. DOISNE and R. NOSSENT

DOI: https://doi.org/10.1051/jphyscol:1987305

PROCESSING AND PROPERTIES OF 2091 AND 8090 FORGINGS p. C3-43

D. MARCHIVE and M.O. CHARUE

DOI: https://doi.org/10.1051/jphyscol:1987306

THE METALLURGICAL ASPECTS OF ALUMINIUM-LITHIUM ALLOYS IN VARIOUS PRODUCT FORMS FOR HELICOPTER STRUCTURAL APPLICATIONS p. C3-49

A.F. SMITH

DOI: https://doi.org/10.1051/jphyscol:1987307

THE SAFETY OF MOLTEN ALUMINIUM-LITHIUM ALLOYS IN THE PRESENCE OF COOLANTS p. C3-63

F.M. PAGE, A.T. CHAMBERLAIN and R. GRIMES

DOI: https://doi.org/10.1051/jphyscol:1987308

RECYCLING OF ALUMINIUM-LITHIUM PROCESS SCRAP p. C3-75

W.R. WILSON, J. WORTH, E.P. SHORT and C.F. PYGALL

DOI: https://doi.org/10.1051/jphyscol:1987309

HIGH PURITY ALUMINIUM-LITHIUM MASTER ALLOY BY MOLTEN SALT ELECTROLYSIS p. C3-85

Y. WATANABE, M. TOYOSHIMA and K. ITOH

DOI: https://doi.org/10.1051/jphyscol:1987310

DIFFICULTIES IN GRAIN REFINING ALUMINUM LITHIUM ALLOYS USING COMMERCIAL Al-Ti AND Al-Ti-Bor MASTER ALLOYS p. C3-93

L.C. LABARRE, R.S. JAMES, J.J. WITTERS, R.J. O'MALLEY and M.R. EMPTAGE

DOI: https://doi.org/10.1051/jphyscol:1987311

TITANIUM CARBON ALUMINIUM : A NOVEL GRAIN REFINER FOR ALUMINIUM-LITHIUM ALLOYS p. C3-103

M.E.J. BIRCH and A.J.J. COWELL

DOI: https://doi.org/10.1051/jphyscol:1987312

GRAIN REFINING IN Al-Li ALLOYS BY ELECTROMAGNETIC STIRRING p. C3-109

C. VIVES, J. BAS and Y. CANS

DOI: https://doi.org/10.1051/jphyscol:1987313

CASTABILITY OF Al-Li-Mg AND Al-Li-Cu-Mg ALLOYS p. C3-117

C.H. TONG, L.G. YAO, C.Y. NIEH, C.P. CHANG and S.E. HSU

DOI: https://doi.org/10.1051/jphyscol:1987314

MECHANICAL PROPERTIES AND MICROSTRUCTURE OF Al-Li INVESTMENT CASTINGS p. C3-123

T.G. HAYNES III, M. WYTE and D. WEBSTER

DOI: https://doi.org/10.1051/jphyscol:1987315

THE METALLURGY OF INDUSTRIAL Al-Li ALLOYS p. C3-131

P. MEYER, Y. CANS, D. FERTON and M. REBOUL

DOI: https://doi.org/10.1051/jphyscol:1987316

THE PHYSICAL METALLURGY OF ALUMINIUM-LITHIUM-COPPER-MAGNESIUM-ZIRCONIUM ALLOYS-8090 AND 8091 p. C3-139

W.S. MILLER, J. WHITE and D.J. LLOYD

DOI: https://doi.org/10.1051/jphyscol:1987317

ALUMINIUM-LITHIUM-COPPER-MAGNESIUM-ZIRCONIUM ALLOYS WITH HIGH STRENGTH AND HIGH TOUGHNESS - SOLVING THE PERCEIVED DICHOTOMY p. C3-151

W.S. MILLER, J. WHITE, M.A. REYNOLDS, D.S. McDARMAID and G.M. STARR

DOI: https://doi.org/10.1051/jphyscol:1987318

THE EFFECT OF THERMOMECHANICAL PROCESSING VARIABLES ON ANISOTROPY IN MECHANICAL PROPERTIES OF Al-Li ALLOYS p. C3-163

K. TAKAHASHI, K. MINAKAWA and C. OUCHI

DOI: https://doi.org/10.1051/jphyscol:1987319

STATIC RECRYSTALLIZATION AFTER HOT WORKING OF Al-Li ALLOYS p. C3-171

M. GONÇALVES and C.M. SELLARS

DOI: https://doi.org/10.1051/jphyscol:1987320

PROCESSING AND PERFORMANCE OF Al-Li-Cu-X EXTRUSIONS p. C3-179

M.H. SKILLINGBERG and R.F. ASHTON

DOI: https://doi.org/10.1051/jphyscol:1987321

INFLUENCE OF EXTRUSION PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF Al-Li-EXTRUSIONS p. C3-187

G. TEMPUS, G. SCHARF and W. CALLES

DOI: https://doi.org/10.1051/jphyscol:1987322

THE DEVELOPMENT OF 8090 AND 8091 ALLOY EXTRUSIONS p. C3-195

M.A. REYNOLDS and E. CREED

DOI: https://doi.org/10.1051/jphyscol:1987323

EXTRUSION PROCESSING OF AN Al-Li-Cu-Mg-Zr ALLOY AA 2091 p. C3-209

M.J. TAN and T. SHEPPARD

DOI: https://doi.org/10.1051/jphyscol:1987324

VARIATION IN STRUCTURE AND PROPERTIES IN AN Al-Li-Cu-Mg-Zr ALLOY PRODUCED BY EXTRUSION PROCESSING p. C3-219

A.K. MUKHOPADHYAY, H.M. FLOWER and T. SHEPPARD

DOI: https://doi.org/10.1051/jphyscol:1987325

INFLUENCE OF FORMING IN THE T3 CONDITION ON PROPERTIES OF 2090-T8X, 2091-T8X AND 8090-T8X p. C3-231

J.M. PAPAZIAN, G.G. BOTT and P. SHAW

DOI: https://doi.org/10.1051/jphyscol:1987326

DEVELOPMENT OF SUPERPLASTIC 8090 AND 8091 SHEET p. C3-239

R. GRIMES, W.S. MILLER and R.G. BUTLER

DOI: https://doi.org/10.1051/jphyscol:1987327

OPTIMISATION OF STRAIN RATE SENSITIVITY DURING SUPERPLASTIC DEFORMATION OF Al-Li-ALLOY LITAL A p. C3-251

N. RIDLEY, D.W. LIVESEY and J. PILLING

DOI: https://doi.org/10.1051/jphyscol:1987328

THE EFFECT OF SUPERPLASTIC DEFORMATION ON THE TENSILE AND FATIGUE PROPERTIES OF Al-Li (8090) ALLOY p. C3-257

D.S. McDARMAID and A.J. SHAKESHEFF

DOI: https://doi.org/10.1051/jphyscol:1987329

THE EFFECT OF GRAIN BOUNDARY PRECIPITATION ON THE SUPERPLASTICITY OF Al-Li ALLOYS p. C3-269

H. YOSHIDA, S. HIRANO, Y. BABA, T. TSUZUKU and A. TAKAHASHI

DOI: https://doi.org/10.1051/jphyscol:1987330

SUPERPLASTICITY OF 2090 SPF SHEET AT HOT ROLLED GAUGE p. C3-277

C.W. CHO, B.A. CHENEY, D.J. LEGE and J.I. PETIT

DOI: https://doi.org/10.1051/jphyscol:1987331

GRAIN REFINEMENT AND SUPERPLASTICITY IN A LITHIUM-CONTAINING Al-Mg ALLOY BY THERMOMECHANICAL PROCESSING p. C3-285

S.J. HALES, S.B. OSTER, B.W. SANCHEZ and T.R. McNELLEY

DOI: https://doi.org/10.1051/jphyscol:1987332

THE FUSION WELDING OF Al-Li-Cu-Mg (8090) ALLOY p. C3-293

M.R. EDWARDS and V.E. STONEHAM

DOI: https://doi.org/10.1051/jphyscol:1987333

MECHANICAL PROPERTIES OF BEAM ELECTRON WELDINGS IN 8090 ALLOY (CP 271) p. C3-301

P. LE POAC, A.M. NOMINE and D. MIANNAY

DOI: https://doi.org/10.1051/jphyscol:1987334

STRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED ALUMINUM-LITHIUM ALLOYS p. C3-309

N.J. KIM, R.L. BYE and S.K. DAS

DOI: https://doi.org/10.1051/jphyscol:1987335

MICROSTRUCTURES AND PROPERTIES OF RAPID SOLIDIFICATION PROCESSED ALUMINUM-HIGH LITHIUM ALLOYS p. C3-317

P.J. MESCHTER, J.K GREGORY, R.J. LEDERICH, J.E. O'NEAL, E.J. LAVERNIA and N.J. GRANT

DOI: https://doi.org/10.1051/jphyscol:1987336

EXTRUSION OF AN Al-Li-Zr ALLOY PREPARED FROM ATOMIZED POWDER p. C3-327

M.S. MAHMOUD, H.B. McSHANE and T. SHEPPARD

DOI: https://doi.org/10.1051/jphyscol:1987337

A TECHNIQUE FOR IMPROVING THE TOUGHNESS OF Al-Li POWDER METALLURGY ALLOYS p. C3-335

D. WEBSTER

DOI: https://doi.org/10.1051/jphyscol:1987338

EFFECT OF DISPERSOID-FORMING ADDITIONS ON THE RESPONSE TO HEAT TREATMENT OF SPLAT-QUENCHED Al-Li-X ALLOYS p. C3-341

R.C.A. PRATT, P. TSAKIROPOULOS, H. JONES, R.W. GARDINER and J.E. RESTALL

DOI: https://doi.org/10.1051/jphyscol:1987339

METAL MATRIX COMPOSITES BASED ON ALUMINIUM LITHIUM AND SILICON CARBIDE p. C3-347

J. WHITE, I.R. HUGHES, T.C. WILLIS and R.M. JORDAN

DOI: https://doi.org/10.1051/jphyscol:1987340

EXPLORATION OF THE PHASE DIAGRAM OF Al-Li BINARY ALLOYS BY D.S.C. MEASUREMENTS AND MONTE CARLO METHODS p. C3-357

F. LIVET and Y. BRECHET

DOI: https://doi.org/10.1051/jphyscol:1987341

STUDIES ON EARLY AND LATE STAGES OF FORMATION OF δ' PHASES IN Al-Li ALLOYS BY NEUTRON SMALL ANGLE SCATTERING p. C3-365

S. FUJIKAWA, M. FURUSAKA, M. SAKAUCHI and K. HIRANO

DOI: https://doi.org/10.1051/jphyscol:1987342

STRENGTHENING MECHANISMS ASSOCIATED WITH T₁ PARTICLES IN TWO Al-Li-Cu ALLOYS p. C3-373

J-C. HUANG and A.J. ARDELL

DOI: https://doi.org/10.1051/jphyscol:1987343

ATOMIC RESOLUTION IMAGING IN Al-Li-Cu ALLOY p. C3-385

V. RADMILOVIC and G. THOMAS

DOI: https://doi.org/10.1051/jphyscol:1987344

THE EFFECT OF PLASTIC DEFORMATION ON T₁ PRECIPITATION p. C3-397

W.A. CASSADA, G.J. SHIFLET, E.A. STARKE and Jr.

DOI: https://doi.org/10.1051/jphyscol:1987345

COPRECIPITATION HARDENING IN Al-Li-Cu-Mg ALLOYS p. C3-407

P. SAINFORT and B. DUBOST

DOI: https://doi.org/10.1051/jphyscol:1987346

THE ROLE OF MAGNESIUM IN Al-Li-Cu-Mg-Zr ALLOYS p. C3-415

S.J. HARRIS, B. NOBLE and K. DINSDALE

DOI: https://doi.org/10.1051/jphyscol:1987347

THE EFFECT OF FTMT ON THE GRAIN BOUNDARY MICROSTRUCTURE OF ALUMINIUM-LITHIUM-COPPER-MAGNESIUM-ZIRCONIUM ALLOYS p. C3-425

J. WHITE and W.S. MILLER

DOI: https://doi.org/10.1051/jphyscol:1987348

THE EFFECT OF STRECH UPON S-PHASE DISTRIBUTION AND DYNAMIC RECOVERY BEHAVIOUR OF AN Al-Li-Cu-Mg ALLOY p. C3-433

XIA XIAOXIN and J.W. MARTIN

DOI: https://doi.org/10.1051/jphyscol:1987349

THERMAL ANALYSIS STUDY OF THE PRECIPITATION REACTIONS IN Al-Li-Cu-Mg-Zr ALLOYS p. C3-439

A.K. MUKHOPADHYAY, C.N.J. TITE, H.M. FLOWER, P.J. GREGSON and F. SALE

DOI: https://doi.org/10.1051/jphyscol:1987350

CALORIMETRIC EVALUATION OF THE MICROSTRUCTURE OF Al-Cu-Li-Mg 2091 ALLOY p. C3-447

S. ABIS, E. EVANGELISTA, P. MENGUCCI and G. RIONTINO

DOI: https://doi.org/10.1051/jphyscol:1987351

HIGH RESOLUTION TEM STUDY OF PRECIPITATES IN A RAPIDLY SOLIDIFIED Al-Li-Zr ALLOY p. C3-457

N.J. KIM, J.M. HOWE and E.G. BODEN

DOI: https://doi.org/10.1051/jphyscol:1987352

MICROSTRUCTURE OF RAPIDLY SOLIDIFIED Al-Li-Ti ALLOYS p. C3-465

M. LIEBLICH, M. TORRALBA and G. CHAMPIER

DOI: https://doi.org/10.1051/jphyscol:1987353

EXPERIMENTAL STUDY AND THERMODYNAMIC CALCULATION OF THE Al-Li-Mg EQUILIBRIUM PHASE DIAGRAM p. C3-473

B. DUBOST, P. BOMPARD and I. ANSARA

DOI: https://doi.org/10.1051/jphyscol:1987354

THE ICOSAHEDRAL Al-Li-Cu PHASE p. C3-481

F.W. GAYLE

DOI: https://doi.org/10.1051/jphyscol:1987355

A TEM STUDY OF ICOSAHEDRAL AND NEAR ICOSAHEDRAL PHASES IN 8090 ALLOY p. C3-489

G. LAPASSET and A. LOISEAU

DOI: https://doi.org/10.1051/jphyscol:1987356

STRUCTURE OF STABLE INTERMETALLIC COMPOUNDS OF THE Al-Li-Cu-(Mg) AND Al-Li-Zn-(Cu) SYSTEMS p. C3-497

B. DUBOST, M. AUDIER, P. JEANMART, J.-M. LANG and P. SAINFORT

DOI: https://doi.org/10.1051/jphyscol:1987357

QUANTITATIVE ANALYSIS OF INTERMETALLIC PHASES IN Al-Li ALLOYS BY ELECTRON, ION AND NUCLEAR MICROPROBES p. C3-505

F. DEGRÈVE, B. DUBOST, A. DUBUS, N.A. THORNE, F. BODART and G. DEMORTIER

DOI: https://doi.org/10.1051/jphyscol:1987358

POROSITY DEVELOPMENT DURING HEAT TREATMENT OF ALUMINUM-LITHIUM ALLOYS p. C3-513

J.M. PAPAZIAN, J.P.W. WAGNER and W.D. ROONEY

DOI: https://doi.org/10.1051/jphyscol:1987359

SIMS DETERMINATION OF THE SURFACE LITHIUM DEPLETION ZONE IN Al-Li ALLOYS BY QUANTITATIVE IMAGE ANALYSIS p. C3-521

N. THORNE, A. DUBUS, J.M. LANG, F. DEGREVE and P. MEYER

DOI: https://doi.org/10.1051/jphyscol:1987360

NUCLEAR REACTION ANALYSIS OF HYDROGEN SURFACE CONTAMINATION OF Al(Li) ALLOYS p. C3-527

J.P. THOMAS, M. FALLAVIER, G. BEURTON and G. BERLIOUX

DOI: https://doi.org/10.1051/jphyscol:1987361

ANALYSIS OF HYDROGEN BEHAVIOR IN AN Al-Li ALLOY BY TRITIUM ANALYSIS AND TRANSMISSION ELECTRON MICROSCOPIC AUTORADIOGRAPHY p. C3-535

H. SAITO, Y. ISHIDA and H. YOSHIDA

DOI: https://doi.org/10.1051/jphyscol:1987362

TRITIUM RELEASE CHARACTERISTICS OF Al-Li ALLOYS EXAMINED BY LIQUID SCINTILLATION TECHNIQUE p. C3-541

H. SAITO, Y. ISHIDA and H. YOSHIDA

DOI: https://doi.org/10.1051/jphyscol:1987363

TEMPERATURE DEPENDENCE OF YIELD STRENGTH OF Al-Li SINGLE CRYSTALS p. C3-549

Y. MIURA, K. YUSU, M. FURUKAWA and M. NEMOTO

DOI: https://doi.org/10.1051/jphyscol:1987364

ACOUSTIC EMISSION DURING DEFORMATION OF Al-Li ALLOYS p. C3-557

M. FURUKAWA, Y. MIURA and M. NEMOTO

DOI: https://doi.org/10.1051/jphyscol:1987365

DEPENDENCE OF ELASTIC MODULUS ON MICROSTRUCTURE IN 2090-TYPE ALLOYS p. C3-565

M.E. O' DOWD, W. RUCH, E.A. STARKE and Jr.

DOI: https://doi.org/10.1051/jphyscol:1987366

HIGH-STRAIN-RATE BEHAVIOUR OF CP-271 ALUMINIUM-LITHIUM p. C3-577

C.Y. CHIEM, X.W. ZHOU and W.S. LEE

DOI: https://doi.org/10.1051/jphyscol:1987367

HYDROGEN EMBRITTLEMENT IN Al-Li-Cu-Mg ALLOYS (8090-T651) p. C3-587

F. BINSFELD, M. HABASHI, J. GALLAND, J.P. FIDELLE, D. MIANNAY and P. ROFIDAL

DOI: https://doi.org/10.1051/jphyscol:1987368

INFLUENCE OF GRAIN MORPHOLOGY AND TEXTURE ON THE DEFORMATION AND FRACTURE OF EXTRUDED CP276 Al-Li ALLOY p. C3-597

F. BROUSSAUD and C. DIOT

DOI: https://doi.org/10.1051/jphyscol:1987369

THE ROLLING TEXTURE DEVELOPMENT IN AN 8090 Al-Li ALLOY p. C3-605

J. HIRSCH, O. ENGLER, K. LÜCKE, M. PETERS and K. WELPMANN

DOI: https://doi.org/10.1051/jphyscol:1987370

EFFECT OF CRYSTALLOGRAPHIC AND MORPHOLOGIC TEXTURES ON THE ANISOTROPY OF MECHANICAL PROPERTIES OF Al-Li ALLOYS p. C3-613

P. LIPINSKI, M. BERVEILLER, A. HIHI, P. SAINFORT and P. MEYER

DOI: https://doi.org/10.1051/jphyscol:1987371

QUANTITATIVE DETERMINATION OF THE TEXTURE OF Al-Li ALLOYS p. C3-621

A. VADON, C. LARUELLE, J.J. HEIZMANN and P. JEANMART

DOI: https://doi.org/10.1051/jphyscol:1987372

A STUDY OF THE MICROSTRUCTURE AND PROPERTIES OF DIE FORGINGS IN ALUMINIUM-LITHIUM ALLOYS 2091 AND 8090 p. C3-629

A.F. SMITH

DOI: https://doi.org/10.1051/jphyscol:1987373

MICROSTRUCTURE AND PROPERTIES OF Al-Li-Cu-Mg-Zr (8090) HEAVY SECTION FORGINGS p. C3-643

R.E. LEWIS, E.A. STARKE, Jr., W.C. COONS, G. J. SHIFLET, E. WILLNER, J.G. BJELETICH, C.H. MILLS, R.M. HARRINGTON and D.N. PETRAKIS

DOI: https://doi.org/10.1051/jphyscol:1987374

EFFECT OF THERMOMECHANICAL TREATMENT ON TOUGHENING OF Al-Li-Cu-Mg-Zr ALLOY AND ITS TOUGHNESS p. C3-653

M. NIINOMI, K. DEGAWA and T. KOBAYASHI

DOI: https://doi.org/10.1051/jphyscol:1987375

INFLUENCE OF PROCESSING CONDITIONS ON THE MONOTONIC PROPERTIES OF 8090 ALLOY p. C3-661

C. DAMERVAL, J.L. RAVIART and G. LAPASSET

DOI: https://doi.org/10.1051/jphyscol:1987376

TOUGHNESS AND HEAT TREATMENT. RELATIONSHIP IN A 2091 ALUMINIUM ALLOY p. C3-669

L. HAUTEFEUILLE, R. RAHOUADJ, Y. BARBAUX and M. CLAVEL

DOI: https://doi.org/10.1051/jphyscol:1987377

MECHANICAL PROPERTIES AND CORROSION BEHAVIOUR OF 2091 SHEET MATERIAL p. C3-677

K. WELPMANN, H. BUHL, R. BRAUN and M. PETERS

DOI: https://doi.org/10.1051/jphyscol:1987378

THE EFFECT OF LOW MELTING POINT IMPURITIES ON THE PROPERTIES OF Al-Li ALLOYS p. C3-685

D. WEBSTER

DOI: https://doi.org/10.1051/jphyscol:1987379

GRAIN BOUNDARY CHEMICAL ANALYSIS BY SIMS p. C3-693

J.M. LANG, F. DEGRÈVE and N.A. THORNE

DOI: https://doi.org/10.1051/jphyscol:1987380

LOW CYCLE FATIGUE OF BINARY Al-Li ALLOY : I-EXPERIMENTAL RESULTS AND MECHANICAL MODELIZATION p. C3-701

S. HAN, A. TOURABI and B. WACK

DOI: https://doi.org/10.1051/jphyscol:1987381

LOW CYCLE FATIGUE OF BINARY Al-Li ALLOYS. II-MICROSTRUCTURAL CHARACTERIZATION AND IN SITU FATIGUE EXPERIMENTS p. C3-709

Y. BRECHET, F. LOUCHET and J.L. VERGER-GAUGRY

DOI: https://doi.org/10.1051/jphyscol:1987382

LOW CYCLE FATIGUE OF BINARY Al-Li ALLOYS : III-COALESCENCE OF δ' PRECIPITATES IN FATIGUE : X-RAY LOW ANGLE SCATTERING INVESTIGATION p. C3-717

Y. BRECHET and F. LIVET

DOI: https://doi.org/10.1051/jphyscol:1987383

INTERACTIONS BETWEEN DISLOCATIONS AND CRYSTALLINE DEFECTS DURING THE CYCLIC DEFORMATION OF A 0.7 Wt% Al-Li ALLOY p. C3-721

J.M. GENTZBITTEL, C. ESNOUF and R. FOUGERES

DOI: https://doi.org/10.1051/jphyscol:1987384

THE PHENOMENON OF STRESS INSTABILITIES IN Al-Li BINARY ALLOYS AND MICROSCOPIC MECHANISMS CONNECTED p. C3-729

J.M. GENTZBITTEL, G. VIGIER and R. FOUGERES

DOI: https://doi.org/10.1051/jphyscol:1987385

LOW CYCLE FATIGUE AND FATIGUE CRACK GROWTH IN Al-Li, Al-Li-Zr AND 8090 ALLOYS p. C3-737

Y. XIAO and P . BOMPARD

DOI: https://doi.org/10.1051/jphyscol:1987386

THE EFFECT OF AGEING ON THE FATIGUE BEHAVIOUR OF Al-2.3 wt% Li SINGLE CRYSTALS p. C3-745

J. SCHNEIDER, H.-J. GUDLADT and V. GEROLD

DOI: https://doi.org/10.1051/jphyscol:1987387

EFFECT OF MICROSTRUCTURE ON HIGH CYCLE FATIGUE BEHAVIOR OF Al-Li BINARY ALLOY p. C3-753

Z. DI, S. SAJI and S. HORI

DOI: https://doi.org/10.1051/jphyscol:1987388

THE TEMPERATURE DEPENDENCE OF THE HIGH CYCLE FATIGUE PROPERTIES OF AN Al-Li-Cu-Mg ALLOY p. C3-761

P.J.E. BISCHLER and J.W. MARTIN

DOI: https://doi.org/10.1051/jphyscol:1987389

FACTORS OF CRACK INITIATION AND MICROCRACK PROPAGATION IN ALUMINUM LITHIUM 2091 AND IN ALUMINUM 2024 p. C3-769

L. FARCY, C. CARRE, M. CLAVEL, Y. BARBAUX and D. ALIAGA

DOI: https://doi.org/10.1051/jphyscol:1987390

NEAR THRESHOLD FATIGUE CRACK GROWTH IN A 8090 LITHIUM CONTAINING Al ALLOY p. C3-777

R. TINTILLIER, H.S. YANG, N. RANGANATHAN and J. PETIT

DOI: https://doi.org/10.1051/jphyscol:1987391

FATIGUE CRACK PROPAGATION BEHAVIOUR OF THE Al-Li ALLOY 8090 COMPARED TO 2024 p. C3-785

M. PETERS, V. BACHMANN and K. WELPMANN

DOI: https://doi.org/10.1051/jphyscol:1987392

FATIGUE CRACK GROWTH OF THE 8090 ALLOY UNDER OVERLOADING p. C3-793

C. LESPINASSE and C. BATHIAS

DOI: https://doi.org/10.1051/jphyscol:1987393

FATIGUE CRACK PROPAGATION BEHAVIOR OF 2091 T8 AND 2024 T3 UNDER CONSTANT AND VARIABLE AMPLITUDE LOADING p. C3-801

N. OHRLOFF, A. GYSLER and G. LÜTJERING

DOI: https://doi.org/10.1051/jphyscol:1987394

FATIGUE AND CORROSION FATIGUE OF 8090 Al-Li-Cu-Mg ALLOY p. C3-809

F.L. HADDLETON, S. MURPHY and T.J. GRIFFIN

DOI: https://doi.org/10.1051/jphyscol:1987395

FATIGUE CRACK INITIATION AND PROPAGATION PROPERTIES OF AL-Li-Cu ALLOYS IN AIR AND IN AQUEOUS CORROSIVE SOLUTIONS p. C3-817

T. MAGNIN, P. RIEUX, C. LESPINASSE and C. BATHIAS

DOI: https://doi.org/10.1051/jphyscol:1987396

LOCAL CHEMISTRY OF STRESS-CORROSION CRACKING IN Al-Li-Cu-Mg ALLOYS p. C3-825

J.G. CRAIG, R.C. NEWMAN, M.R. JARRETT and N.J.H. HOLROYD

DOI: https://doi.org/10.1051/jphyscol:1987397

THE EFFECT OF HYDROGEN DURING STRESS CORROSION CRACKING AND CORROSION FATIGUE OF Al-Li-Cu ALLOYS IN 3.5 % NaCl SOLUTIONS p. C3-835

T. MAGNIN and M. REBIÈRE

DOI: https://doi.org/10.1051/jphyscol:1987398

CORROSION BEHAVIOUR OF Al-Li-Cu-Mg ALLOY 8090-T651 p. C3-843

R. BRAUN and H. BUHL

DOI: https://doi.org/10.1051/jphyscol:1987399

STATISTICAL STUDY OF THE PITTING CORROSION OF THE 8090 ALUMINIUM LITHIUM ALLOY p. C3-851

S. SCHNURIGER, G. MANKOWSKI, Y. ROQUES, G. CHATAINIER and F. DABOSI

DOI: https://doi.org/10.1051/jphyscol:19873100

CORRELATION BETWEEN LONG TIME AND SHORT TIME TESTS TO DETECT PITTING AND EXFOLIATION CORROSION IN Al-Li (8090) ALLOYS p. C3-861

J. GARCIA, P. PONTHIAUX, M. HABASHI and J. GALLAND

DOI: https://doi.org/10.1051/jphyscol:19873101

CORRELATION BETWEEN AGEING HEAT TREATMENTS, MICROSTRUCTURE AND STRESS CORROSION PROPERTIES OF Al-Li-Cu-Mg ALLOYS p. C3-871

M. AHMAD

DOI: https://doi.org/10.1051/jphyscol:19873102

INTERGRANULAR AND EXFOLIATION CORROSION STUDY OF Al-Li-Cu-Mg-Zr ALLOYS p. C3-881

M. REBOUL and P. MEYER

DOI: https://doi.org/10.1051/jphyscol:19873103

FACTORS INFLUENCING THE ENVIRONMENTAL BEHAVIOUR OF ALUMINIUM-LITHIUM ALLOYS p. C3-891

A. GRAY

DOI: https://doi.org/10.1051/jphyscol:19873104

CORROSION RESISTANCE OF ALUMINUM-LITHIUM ALLOYS p. C3-905

F.S. LIN, Y. MOJI, W.E. QUIST and D.V. BADGER

DOI: https://doi.org/10.1051/jphyscol:19873105

CLOSING ADDRESS p. C3-913

B. DUBOST

DOI: https://doi.org/10.1051/jphyscol:19873106

Le Journal de Physique Colloques

Volume 48 / No C3 (Septembre 1987)

4th International Aluminium Lithium Conference