Numéro
J. Phys. Colloques
Volume 51, Numéro C1, Janvier 1990
Proceeding of the International Congress
Intergranular and Interphase Boundaries in materials
Page(s) C1-257 - C1-262
DOI https://doi.org/10.1051/jphyscol:1990140
J. Phys. Colloques 51, C1-257-C1-262 (1990)
DOI: 10.1051/jphyscol:1990140

AUGER ELECTRON SPECTROSCOPY OF PHOSPHORUS SEGREGATION IN AN Fe-Ni-C-P ALLOY AT 400°C

P.E.V. DE MIRANDA1, A. LARERE2 et M. HABASHI3

1  COPPE.UFRJ, PO. Box 68505, 21945 Rio de Janeiro, RJ Brazil (on leave at ECP-PARIS)
2  Laboratoire de Métallurgie Structurale ISMA, URA CNRS 1107, Université Paris-Sud, F-90405 Orsay Cedex, France
3  Laboratoire Corrosion-Fragilisation-Hydrogène, Ecole Centrale de Paris, F-92295 Châtenay-Malabry Cedex, France


Abstract
L'étude par spectroscopie des électrons AUGER de la ségrégation superficielle du P dans un alliage austéno-martensitique Fe-Ni-C-P à 400°C a montré une interaction répulsive entre C et P ségrégés et un coefficient de diffusion de P de 1,310-17m2/s. Cette valeur est environ d'un ordre et demi plus grand par rapport au coefficient donné dans la littérature pour la ferrite. Ceci peut s'interpréter séparément ou concomitamment par l'un des faits suivants : diffusion en surface, composition chimique et/ou microstructure. L'enthalpie libre de ségrégation du P a été trouvée être égale à - 48,8kJmol-1.


Abstract
The study of AUGER electron spectroscopy of the P surface segregation in an austeno-martensitic Fe-Ni-C-P model alloy at 400° C has showed a repulsive interaction between segregated C and P and a P diffusion coefficient of 1.3x10-17m2/s. This value is about one and a half order of magnitude higher than the P diffusion coefficient reported in the literature for ferrite. This was explained as the separate or concomitant effect of either surface diffusion, chemical composition and/or microstructure. The free energy of P segregation was determined to be equal to - 48,8 kJ/mol.