Numéro
J. Phys. Colloques
Volume 32, Numéro C1, Février 1971
EXPOSÉS et COMMUNICATIONS présentés à la 7ème CONFÉRENCE INTERNATIONALE DE MAGNÉTISME 1970
Page(s) C1-857 - C1-858
DOI https://doi.org/10.1051/jphyscol:19711300
EXPOSÉS et COMMUNICATIONS présentés à la 7ème CONFÉRENCE INTERNATIONALE DE MAGNÉTISME 1970

J. Phys. Colloques 32 (1971) C1-857-C1-858

DOI: 10.1051/jphyscol:19711300

ANISOTROPIC MAGNETIZATION IN Zn2Y

C. VOIGT1, M. ALKER1 and K. A. HEMPEL2

1  Institut für Angewandte Physik der Universität Münster, Germany
2  Institut für Werkstoffe der Elektrotechnik, Technische Hochschule Aachen, Germany.


Résumé
On a mesuré le couple d'anisotropie sur un monocristal de Zn2Y (Zn2Ba2Fe12O22) entre 22,5 °C et le point de Curie jusqu'à H = 16 kOe. Le couple maximal Tmax dépend presque linéairement de H pour H ≥ 9 kOe. D'après Schelleng et Rado on peut écrire pour les petites valeurs de M1 (composante anisotrope de l'aimantation) Tmax ≈ - V(K1- M1H) ; V = volume de l'échantillon. La première constante d'anisotropie K1 décroît de - 7,9 x 105 erg cm-3 à 22,5 °C jusqu'à 0 à 110 °C. Les variations de M1 avec la température sont faibles (M1 ≈ 5,5 G à 22,5 °C). Les valeurs de la rigidité magnétique (couple/radian) mesurées à 22,5 °C confirment les résultats des mesures du couple.


Abstract
Torque measurements were performed on a single crystal of Zn2Y (Zn2Ba2Fe12O22) between 22,5 °C and Curie point up to H = 16 kOe. The maximum torque Tmax depends almost linearly on H for H ≥ 9 kOe. According to Schelleng and Rado one has for small values of M1 (anisotropic part of the magnetization) : Tmax ≈ -V(K1 - M1H) ; V = sample volume. The first order anisotropy constant K1 decreases from - 7,9 x 105 erg cm-3 at 22,5 °C to 0 at 110 °C. M1 varies slowly with temperature (M1 ≈ 5,5 G at 22,5 °C). Measurements of the magnetic stiffness (torque/radian) at 22,5 °C confirm the results of the torque measurements.