| Issue |
J. Phys. Colloques
Volume 42, Number C5, Octobre 1981
ICIFUAS-7Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids |
|
|---|---|---|
| Page(s) | C5-487 - C5-492 | |
| DOI | https://doi.org/10.1051/jphyscol:1981573 | |
ICIFUAS-7
Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids
J. Phys. Colloques 42 (1981) C5-487-C5-492
DOI: 10.1051/jphyscol:1981573
Department of Metals and Technology, Harbin Institute of Technology, Harbin, Republic of China
Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids
J. Phys. Colloques 42 (1981) C5-487-C5-492
DOI: 10.1051/jphyscol:1981573
RELATIONSHIP BETWEEN INTERNAL FRICTION AND CREEP RUPTURE BEHAVIOR OF ALUMINUM ALLOYS
Ting-Chuan LeiDepartment of Metals and Technology, Harbin Institute of Technology, Harbin, Republic of China
Abstract
Internal friction measurements and creep rupture tests were carried out on Al-Cu, Al-Fe and Al-Si alloys and a commercial Al-Cu-Mg-Si-Fe alloy. It was found that under conditions of the same grain size the relationship between internal friction (Q-1) and creep rupture time ([MATH]) may be written as [MATH] = A-8Q-1, in which A and B are constants.