| Numéro |
J. Phys. Colloques
Volume 42, Numéro C5, Octobre 1981
ICIFUAS-7Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids |
|
|---|---|---|
| Page(s) | C5-229 - C5-234 | |
| DOI | https://doi.org/10.1051/jphyscol:1981532 | |
ICIFUAS-7
Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids
J. Phys. Colloques 42 (1981) C5-229-C5-234
DOI: 10.1051/jphyscol:1981532
1 Now at Miniper S.A., CH-1095 Lutry, Switzerland
2 Now at Swiss Federal Institute for Reactor Research, CH-5303 Würenlingen, Switzerland
3 Institut de Génie Atomique, Swiss Federal Institute of Technology, Ecublens, CH-1015 Lausanne, Switzerland
Seventh International Conference on Internal Friction and Ultrasonic Attenuation in Solids
J. Phys. Colloques 42 (1981) C5-229-C5-234
DOI: 10.1051/jphyscol:1981532
INFLUENCE OF REMAINING IMPURITY CONCENTRATION ON THE INTERNAL FRICTION AFTER CYCLIC DEFORMATION IN PURE ALUMINIUM
F. Baudraz1, B. Tirbonod2 et R. Gotthardt31 Now at Miniper S.A., CH-1095 Lutry, Switzerland
2 Now at Swiss Federal Institute for Reactor Research, CH-5303 Würenlingen, Switzerland
3 Institut de Génie Atomique, Swiss Federal Institute of Technology, Ecublens, CH-1015 Lausanne, Switzerland
Abstract
The characteristic internal friction peak of low temperature (78K) cyclic deformation in Aluminium has been studied. The peak can be explained by an interaction dislocation-dislocation loop (1). The height of this peak depends on the type and the concentration of impurities and its evolution with annealing temperature can be understood by supposing a diffusion mechanism of dislocation loops and impurities.