CHARACTERISTICS OF DEFORMATION AND TRANSFORMATION PSEUDOELASTICITY IN Ti-Ni ALLOYS
J. Phys. Colloques, 43 C4 (1982) C4-255-C4-260
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Abnormal impacts of pre-deformation on the martensitic transformation behaviors of precursory NiTiNb alloys
Youyi Yang, Qiuzhen Li, Pengfei Gao, Jingyuan Guo, Lishan Cui and Kaiyuan YuScripta Materialia 263 116693 (2025)
https://doi.org/10.1016/j.scriptamat.2025.116693
On 2-stage martensitic transformation behavior in aged Ti50.5Ni33.5Cu11.5Pd4.5 alloys with near-zero thermal hysteresis
Hang Li, Lili Chen, Xiaoguang Guan, Yang Cai, Xianglong Meng and Wei CaiInternational Journal of Materials Research 116 (2) 141 (2025)
https://doi.org/10.1515/ijmr-2024-0022
Effect of the curvature of the cross-section on buckling characteristics of convex-tape-shaped Cu-Al-Mn shape memory alloy elements
Shuto NAKASHIMA, Hiroki CHO, Takumi SASAKI and Sumio KISEMechanical Engineering Journal 11 (6) 24-00131 (2024)
https://doi.org/10.1299/mej.24-00131
Peculiar martensitic microstructure and dislocation accumulation behavior in Ti-Ni-Cu shape memory alloys almost satisfying the triplet condition
A. Heima, Y. Shinohara, H. Akamine, M. Nishida and T. InamuraActa Materialia 269 119823 (2024)
https://doi.org/10.1016/j.actamat.2024.119823
Effect of heat treatment conditions on the phase transformation characteristics of nitinol
Levent Öncel and Mahmut AçmaJournal of Innovative Engineering and Natural Science 4 (2) 621 (2024)
https://doi.org/10.61112/jiens.1484623
Laser beam welding of NiTinol sheets in butt joint arrangement and optimization of the process using desirability function analysis and metaheuristic techniques
Susmita Datta, Mohammad Shahid Raza, Amit Kumar Das, Partha Saha and Dilip Kumar PratiharProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 (5) 2080 (2024)
https://doi.org/10.1177/09544089221144509
Phase transformation behavior and mechanical properties of HyFlex EDM nickel-titanium endodontic rotary instrument: Evaluation at body temperature
Shunsuke Kimura, Arata Ebihara, Keiichiro Maki, Moe Sandar Kyaw, Yuka Kasuga, Satoshi Omori and Takashi OkijiJournal of Dental Sciences 19 (2) 929 (2024)
https://doi.org/10.1016/j.jds.2023.07.039
Effects of Direct Aging Heat Treatments on the Superelasticity of Nitinol Produced via Laser Powder Bed Fusion
Maria Beatrice Abrami, Marialaura Tocci, Dermot Brabazon, Marcello Cabibbo and Annalisa PolaMetallurgical and Materials Transactions A 55 (10) 3889 (2024)
https://doi.org/10.1007/s11661-024-07513-6
(2023)
https://doi.org/10.2139/ssrn.4634847
NiTi Esaslı Saclara Uygulanan Farklı Çözündürme ve Yaşlandırma Isıl İşlemlerinin Metalografik ve Mekanik Özelliklere Etkileri
Sinan AKSÖZ, Rıdvan ARSLAN, Nimet KARDEŞ SEVER and Bülent BOSTANPoliteknik Dergisi 26 (2) 693 (2023)
https://doi.org/10.2339/politeknik.979707
Comparative study on weld characterisation and corrosion performance of laser-welded NiTinol
Susmita Datta, Rajib Chakraborty, Mohammad Shahid Raza, Partha Saha and Dilip Kumar PratiharScience and Technology of Welding and Joining 28 (8) 792 (2023)
https://doi.org/10.1080/13621718.2023.2231255
Negative temperature-dependence of stress-induced R→B19′ transformation in nanocrystalline NiTi alloy
Taotao Wang, Xiangxiang Rao, Qiang Zhang, et al.Materials Research Letters 11 (4) 250 (2023)
https://doi.org/10.1080/21663831.2022.2141587
(2023)
https://doi.org/10.2139/ssrn.4570804
Use of Dynamic Mechanical Analysers to Characterize Shape Memory Alloys: Cautions and Considerations from an Experimental Analysis
Zoroastro Torres Vilar, Estephanie Nobre Dantas Grassi, Henrique Martinni Ramos de Oliveira and Carlos José de AraujoInternational Journal of Thermophysics 44 (9) (2023)
https://doi.org/10.1007/s10765-023-03249-4
Novel Ti–20Zr–49.7Pd High Temperature Shape Memory Alloy with Facilitated Detwinning and Precipitation Strengthening
Hirobumi Tobe, Shunsuke Kojima and Eiichi SatoMATERIALS TRANSACTIONS 63 (7) 975 (2022)
https://doi.org/10.2320/matertrans.MT-M2022034
Microstructural Investigation of a FeMnAlNi Shape Memory Alloy Processed by Tungsten Inert Gas Wire and Arc Additive Manufacturing
Vincent Fabian Viebranz, Thomas Hassel and Hans Jürgen MaierMetals 12 (10) 1731 (2022)
https://doi.org/10.3390/met12101731
Study on laser beam butt-welding of NiTinol sheet and input-output modelling using neural networks trained by metaheuristic algorithms
Susmita Datta, Amit Kumar Das, Mohammad Shahid Raza, Partha Saha and Dilip Kumar PratiharMaterials Today Communications 32 104089 (2022)
https://doi.org/10.1016/j.mtcomm.2022.104089
Study on Buckling Characteristics of a Convex Tape-Shaped Ti-Ni Shape Memory Alloy Element for Application to Passive Vibration Isolator Devices and Force Limit Devices
Hiroki Cho, Sho Nagamatsu and Takumi SasakiActuators 11 (3) 88 (2022)
https://doi.org/10.3390/act11030088
Effect of Heat Treatment on the Vibration Isolation Performance of Axially Symmetric NiTi Wire Mesh Damper
Yichuan Shao, Mingyang Su, Yaoqiang Wei, et al.Symmetry 14 (10) 2209 (2022)
https://doi.org/10.3390/sym14102209
Small stress-hysteresis in a nanocrystalline TiNiCuFe alloy for elastocaloric applications over wide temperature window
Hui Zhang, Jinyi Liu, Zhiyuan Ma, et al.Journal of Alloys and Compounds 928 167195 (2022)
https://doi.org/10.1016/j.jallcom.2022.167195
Structural evolution and thermal stability of functionally graded NiTi nano-glass thin films alloys during crystallization
Maryam Mohri, Farsad Forghani and Mahmoud Nili-AhmadabadiMaterials Characterization 187 111850 (2022)
https://doi.org/10.1016/j.matchar.2022.111850
Low-energy irradiation induced giant quasilinear superelasticity over wide temperature range in NiTi shape memory alloys
Chuanxin Liang, Wenbo Liu, Hengfeng Gong and Dong WangPhysical Review Materials 6 (4) (2022)
https://doi.org/10.1103/PhysRevMaterials.6.045602
Transformation behavior and superelasticity of TiZrHfNiCoCu multi-component high-temperature shape memory alloys
Izaz Ur Rehman, Shuanglei Li and Tae-Hyun NamJournal of Alloys and Compounds 884 161108 (2021)
https://doi.org/10.1016/j.jallcom.2021.161108
Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys
Min Soo Park, Wan-Ting Chiu, Naoki Nohira, Masaki Tahara and Hideki HosodaMaterials Science and Engineering: A 822 141668 (2021)
https://doi.org/10.1016/j.msea.2021.141668
Theoretical Analysis of Hysteresis and Characteristic Transition Temperatures of Iron-Based Memory Metals
V. Sampath, Sai Venkata Gayathri Ayyagari, R. Srinithi, et al.Transactions of the Indian Institute of Metals 74 (3) 611 (2021)
https://doi.org/10.1007/s12666-020-02147-9
Latent heat storage capacity of NiTi shape memory alloy
Hiroyuki KatoJournal of Materials Science 56 (13) 8243 (2021)
https://doi.org/10.1007/s10853-021-05777-6
Current technology in endodontic instrumentation: advances in metallurgy and manufacture
Faith Campbell, Joanne Cunliffe and James DarceyBritish Dental Journal 231 (1) 49 (2021)
https://doi.org/10.1038/s41415-021-3170-1
The influence of hysteresis loop in a NiTi shape memory oscillator behavior
Hugo de Souza Oliveira and Aline Souza de PaulaSmart Materials and Structures 29 (10) 105033 (2020)
https://doi.org/10.1088/1361-665X/abb070
Temperature-dependence of superelastic stress in nanocrystalline NiTi with complete transformation capability
T. Wang, Z. Ma, X. Rao, et al.Intermetallics 127 106970 (2020)
https://doi.org/10.1016/j.intermet.2020.106970
Optimization of Wire EDM Process Parameters for Medical Grade Nickel Titanium Shape Memory Alloy
Vinayak N Kulkarni, V N Gaitonde, K S Nalavade, Mrityunjay Doddamani and Gajanan M NaikStrojnícky časopis - Journal of Mechanical Engineering 70 (1) 69 (2020)
https://doi.org/10.2478/scjme-2020-0007
Formation mechanism of Ni2Ti4O in NITI shape memory alloy
Wei-Yu Kai, Kai-Chun Chang, Hsu-Fu Wu, Shi-Wei Chen and An-Chou YehMaterialia 5 100194 (2019)
https://doi.org/10.1016/j.mtla.2018.100194
Corrosion behavior, in vitro and in vivo biocompatibility of a newly developed Ti–16Nb–3Mo–1Sn superelastic alloy
Yazan Al-Zain, Akiko Yamamoto, Jihad M. AlAjlouni, et al.Materials Science and Engineering: C 104 109906 (2019)
https://doi.org/10.1016/j.msec.2019.109906
Investigations on Wire Electro Discharge Machining (WEDM) characteristics of NiTi Shape Memory Alloy
Vinayak N Kulkarni, V N Gaitonde, K S Nalavade and M S PatilIOP Conference Series: Materials Science and Engineering 577 (1) 012078 (2019)
https://doi.org/10.1088/1757-899X/577/1/012078
Fabrication and Output Power Characteristics of a Pulley-type SMA Heat-engine Including the Idler Wheel with a Cooling System
T. Akagi, C. Nakagawa, Y. Takeda and H. ChoTransactions of the Materials Research Society of Japan 43 (1) 23 (2018)
https://doi.org/10.14723/tmrsj.43.23
Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film
Maryam Mohri, Milad Taghizadeh, Di Wang, Horst Hahn and Mahmoud Nili-AhmadabadiMaterials Characterization 135 317 (2018)
https://doi.org/10.1016/j.matchar.2017.11.056
Effects of Heating and Cooling Cycle on the Shape Memory and Mechanical Characteristics of Tape-shaped Shape Memory Alloy Element
C. Nakagawa and H. ChoTransactions of the Materials Research Society of Japan 43 (1) 19 (2018)
https://doi.org/10.14723/tmrsj.43.19
Effect of Heat Treatment on Repetitively Scanned SLM NiTi Shape Memory Alloy
Zhong Xun Khoo, Jia An, Chee Kai Chua, Yu Fang Shen, Che Nan Kuo and Yong LiuMaterials 12 (1) 77 (2018)
https://doi.org/10.3390/ma12010077
Shaping Ability of Superelastic and Controlled Memory Nickel-Titanium File Systems: An In Vitro Study
Raidan A. Ba-Hattab and Dieter PahnckeInternational Journal of Dentistry 2018 1 (2018)
https://doi.org/10.1155/2018/6050234
Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys
Soheil Saedi, Ali Sadi Turabi, Mohsen Taheri Andani, et al.Materials Science and Engineering: A 686 1 (2017)
https://doi.org/10.1016/j.msea.2017.01.008
Advances in Shape Memory Materials
Hiroki Cho, Yuji Takeda and Toshio SakumaAdvanced Structured Materials, Advances in Shape Memory Materials 73 1 (2017)
https://doi.org/10.1007/978-3-319-53306-3_1
Effect of Cold Work and Partial Annealing on Thermomechanical Behaviour of Ti-50.5at%Ni
Abdus Samad Mahmud, Zhigang Wu, Hong Yang and Yinong LiuShape Memory and Superelasticity 3 (1) 57 (2017)
https://doi.org/10.1007/s40830-017-0103-6
Novel method to analyse tensile properties of ultra-fine NiTi wires with a visual extensometer
A. Michael, Y.N. Zhou and M.I. KhanMaterials Letters 182 177 (2016)
https://doi.org/10.1016/j.matlet.2016.06.081
Effect of indentation temperature on nickel-titanium indentation-induced two-way shape-memory surfaces
Stephan A. Brinckmann, Mareike Frensemeier, Christopher M. Laursen, Hans J. Maier, Dominik Britz, Andreas S. Schneider, Frank Mücklich and Carl P. FrickMaterials Science and Engineering: A 675 253 (2016)
https://doi.org/10.1016/j.msea.2016.08.036
https://doi.org/10.12794/metadc849732
A stabilized, high stress self-biasing shape memory alloy actuator
B Panton, Y N Zhou and M I KhanSmart Materials and Structures 25 (9) 095027 (2016)
https://doi.org/10.1088/0964-1726/25/9/095027
198 289 (2014)
https://doi.org/10.1007/978-3-642-55375-2_12
The influence of heat treatment on the mechanical properties of Ni-Ti file materials
Kana MIYARA, Yoshio YAHATA, Yohsuke HAYASHI, et al.Dental Materials Journal 33 (1) 27 (2014)
https://doi.org/10.4012/dmj.2013-196
Basic Research and Development of Shape Memory Alloys
Shuichi MiyazakiMateria Japan 53 (5) 197 (2014)
https://doi.org/10.2320/materia.53.197
Elastic Limit of Fe–Pd Alloys Exhibiting Lattice Softening
Fei Xiao, Takashi Fukuda and Tomoyuki KakeshitaISIJ International 54 (6) 1374 (2014)
https://doi.org/10.2355/isijinternational.54.1374
Surface Stoichiometry and Oxidation of NiTi
Jian Xin Zhu, Da Wei Jin, Jian Zhang and Hong Liang ZhaoApplied Mechanics and Materials 307 387 (2013)
https://doi.org/10.4028/www.scientific.net/AMM.307.387
Research and Development of Ti-Ni-base Shape Memory Alloys
Shuichi MiyazakiMateria Japan 51 (5) 209 (2012)
https://doi.org/10.2320/materia.51.209
Fatigue crack initiation and propagation of a TiNi shape memory alloy
A.-L. Gloanec, P. Cerracchio, B. Reynier, A. Van Herpen and P. RibertyScripta Materialia 62 (10) 786 (2010)
https://doi.org/10.1016/j.scriptamat.2010.02.001
New method for improving properties of SMA coil springs
K. K. Jee, J. H. Han, Y. B. Kim, D. H. Lee and W. Y. JangThe European Physical Journal Special Topics 158 (1) 261 (2008)
https://doi.org/10.1140/epjst/e2008-00685-y
Effect of Rotation Speed on Transformation Behavior in Ti-48at%Ni Shape Memory Alloy Melt-Spun Ribbon
Hong Yan Xing, Hee Young Kim and Shuichi MiyazakiMaterials Science Forum 561-565 1481 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.561-565.1481
TiNi-Base and Ti-Base Shape Memory Alloys
Shuichi Miyazaki and Hee Young KimMaterials Science Forum 561-565 5 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.561-565.5
Superelasticity in a New BioImplant Material: Ni-rich 55NiTi Alloy
R. R. Adharapurapu and K. S. VecchioExperimental Mechanics 47 (3) 365 (2007)
https://doi.org/10.1007/s11340-006-9004-x
Superelastic Property of Ti-Ni Alloy Produced by Casting After SHS
Kazuhiro Kitamura, Toshio Kuchida, Tadashi Inaba, Masataka Tokuda and Yukiharu YoshimiMATERIALS TRANSACTIONS 47 (11) 2867 (2006)
https://doi.org/10.2320/matertrans.47.2867
Infrared Brazing Ti50Ni50 and Ti–6Al–4V Using the BAg-8 Braze Alloy
Ren-Haur Shiue and Shyi-Kaan WuMATERIALS TRANSACTIONS 46 (9) 2057 (2005)
https://doi.org/10.2320/matertrans.46.2057
Characterization of High-Speed Microactuator Utilizing Shape Memory Alloy Thin Films
M. Tomozawa, K. Okutsu, Hee Young Kim and Shuichi MiyazakiMaterials Science Forum 475-479 2037 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.475-479.2037
Effect of Ni-Content on Shape Memory Behavior of Ti-Rich Ti-Ni Melt-Spun Ribbons
Hongyang Xing, Anak Khantachawana, Hee Young Kim and Shuichi MiyazakiMaterials Science Forum 475-479 1925 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.475-479.1925
Texture and Microstructure of Ti-Ni Melt-Spun Shape Memory Alloy Ribbons
Anak Khantachawana, Hiroshi Mizubayashi and Shuichi MiyazakiMATERIALS TRANSACTIONS 45 (2) 214 (2004)
https://doi.org/10.2320/matertrans.45.214
Texture Analysis and Properties of Rapidly Solidified Ti52Ni38Cu10 Shape Memory Alloy
Venky Saravanan, Anak Khantachawana and Shuichi MiyazakiMATERIALS TRANSACTIONS 45 (2) 208 (2004)
https://doi.org/10.2320/matertrans.45.208
Shock synthesis and characterization of ultrafine grained NiTi shape memory alloy
Xiao Xu and Naresh N ThadhaniScripta Materialia 44 (10) 2477 (2001)
https://doi.org/10.1016/S1359-6462(01)00920-4
Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys
S.K Wu, H.C Lin and S.H ChenMaterials Chemistry and Physics 68 (1-3) 149 (2001)
https://doi.org/10.1016/S0254-0584(00)00348-5
Microstructure in the cubic to trigonal transition
Kevin F. Hane and Thomas W. ShieldMaterials Science and Engineering: A 291 (1-2) 147 (2000)
https://doi.org/10.1016/S0921-5093(00)00952-7
Texture of Ti–Ni rolled thin plates and sputter-deposited thin films
S. Miyazaki, V.H. No, K. Kitamura, A. Khantachawana and H. HosodaInternational Journal of Plasticity 16 (10-11) 1135 (2000)
https://doi.org/10.1016/S0749-6419(00)00004-8
The Electrical Transport Properties of Shape Memory Alloys Under a Stress State
G. Airoldi and M. PozziJournal of Engineering Materials and Technology 121 (1) 108 (1999)
https://doi.org/10.1115/1.2815992
A study on the machinability of a Ti49.6Ni50.4 shape memory alloy
S.K Wu, H.C Lin and C.C ChenMaterials Letters 40 (1) 27 (1999)
https://doi.org/10.1016/S0167-577X(99)00044-0
Energetic evaluation for inducing the thermoelastic martensitic transformation by mechanical stress in Cu–Zn–Al single crystals
F.J Gil and J.M GuilemanyIntermetallics 7 (6) 699 (1999)
https://doi.org/10.1016/S0966-9795(98)00086-7
The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part I—Aged Microstructure and Micro-Mechanical Modeling
Ken Gall, Huseyin Sehitoglu, Yuriy I. Chumlyakov, Irina V. Kireeva and Hans J. MaierJournal of Engineering Materials and Technology 121 (1) 19 (1999)
https://doi.org/10.1115/1.2815993
The Nature of Reversible Change in Ms Temperatures of Ti–Ni Alloys with Alternating Aging
Jinsong Zhang, Wei Cai, Xiaobing Ren, Kazuhiro Otsuka and Makoto AsaiMaterials Transactions, JIM 40 (12) 1367 (1999)
https://doi.org/10.2320/matertrans1989.40.1367
Microstructure and Mechanical Properties of Sputter-Deposited Ti-Ni Alloy Thin Films
A. Ishida and S. MiyazakiJournal of Engineering Materials and Technology 121 (1) 2 (1999)
https://doi.org/10.1115/1.2815996
The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part II—Discussion of Experimental Results
Ken Gall, Huseyin Sehitoglu, Yuriy I. Chumlyakov, Irina V. Kireeva and Hans J. MaierJournal of Engineering Materials and Technology 121 (1) 28 (1999)
https://doi.org/10.1115/1.2815995
Recent developments in the research of shape memory alloys
Kazuhiro Otsuka and Xiaobing RenIntermetallics 7 (5) 511 (1999)
https://doi.org/10.1016/S0966-9795(98)00070-3
In Vitro Thermomechanical Ageing of Ni-Ti Alloys
F. J. Gil and J. A. PlanellJournal of Biomaterials Applications 12 (3) 237 (1998)
https://doi.org/10.1177/088532829801200304
Structural Control: Past, Present, and Future
G. W. Housner, L. A. Bergman, T. K. Caughey, et al.Journal of Engineering Mechanics 123 (9) 897 (1997)
https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)
Microstructure of TiNi shape-memory alloy synthesized by explosive shock-wave compression of Ti–Ni powder mixture
XIAODONG HAN, WENHUI ZOU, RENHUI WANG, SING JIN, ZE ZHANG, TONGCHUN LI and DAZHI YANGJournal of Materials Science 32 (17) 4723 (1997)
https://doi.org/10.1023/A:1018622728936
Martensitic Transformations in Sputter-Deposited Shape Memory Ti–Ni Films
A. Gyobu, Y. Kawamura, H. Horikawa and T. SaburiMaterials Transactions, JIM 37 (4) 697 (1996)
https://doi.org/10.2320/matertrans1989.37.697
176 (1994)
https://doi.org/10.1109/MEMSYS.1994.555619
Characteristics of Deformation and Transformation in Ti44Ni47Nb9 Shape Memory Alloy
Min Piao, Shuichi Miyazaki and Kazuhiro OtsukaMaterials Transactions, JIM 33 (4) 346 (1992)
https://doi.org/10.2320/matertrans1989.33.346
Nucleation and Self-Accommodation of the R-Phase in Ti–Ni Alloys
Takashi Fukuda, Toshio Saburi, Kenji Doi and Soji NennoMaterials Transactions, JIM 33 (3) 271 (1992)
https://doi.org/10.2320/matertrans1989.33.271
Effect of Thermo-mechanical Treatment on Shape Memory Characteristics in a Ti-40Ni-10Cu (at%) Alloy
Tae Hyun Nam, Toshio Saburi and Ken’ichi ShimizuMaterials Transactions, JIM 32 (9) 814 (1991)
https://doi.org/10.2320/matertrans1989.32.814
Engineering Aspects of Shape Memory Alloys
Rohit C.L. Sachdeva and Shuichi MiyazakiEngineering Aspects of Shape Memory Alloys 452 (1990)
https://doi.org/10.1016/B978-0-7506-1009-4.50042-1
Effect of Heat Treatment after Cold Working on the Phase Transformation in TiNi Alloy
Tsunehiko Todoroki and Hirokazu TamuraTransactions of the Japan Institute of Metals 28 (2) 83 (1987)
https://doi.org/10.2320/matertrans1960.28.83