Supplément au Journal de Physique Colloques

Abnormal impacts of pre-deformation on the martensitic transformation behaviors of precursory NiTiNb alloys

Youyi Yang, Qiuzhen Li, Pengfei Gao, Jingyuan Guo, Lishan Cui and Kaiyuan Yu
Scripta Materialia 263 116693 (2025)
https://doi.org/10.1016/j.scriptamat.2025.116693

On 2-stage martensitic transformation behavior in aged Ti50.5Ni33.5Cu11.5Pd4.5 alloys with near-zero thermal hysteresis

Hang Li, Lili Chen, Xiaoguang Guan, Yang Cai, Xianglong Meng and Wei Cai
International Journal of Materials Research 116 (2) 141 (2025)
https://doi.org/10.1515/ijmr-2024-0022

Effect of the curvature of the cross-section on buckling characteristics of convex-tape-shaped Cu-Al-Mn shape memory alloy elements

Shuto NAKASHIMA, Hiroki CHO, Takumi SASAKI and Sumio KISE
Mechanical Engineering Journal 11 (6) 24-00131 (2024)
https://doi.org/10.1299/mej.24-00131

Peculiar martensitic microstructure and dislocation accumulation behavior in Ti-Ni-Cu shape memory alloys almost satisfying the triplet condition

A. Heima, Y. Shinohara, H. Akamine, M. Nishida and T. Inamura
Acta Materialia 269 119823 (2024)
https://doi.org/10.1016/j.actamat.2024.119823

Effect of heat treatment conditions on the phase transformation characteristics of nitinol

Levent Öncel and Mahmut Açma
Journal of Innovative Engineering and Natural Science 4 (2) 621 (2024)
https://doi.org/10.61112/jiens.1484623

Laser beam welding of NiTinol sheets in butt joint arrangement and optimization of the process using desirability function analysis and metaheuristic techniques

Susmita Datta, Mohammad Shahid Raza, Amit Kumar Das, Partha Saha and Dilip Kumar Pratihar
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 238 (5) 2080 (2024)
https://doi.org/10.1177/09544089221144509

Phase transformation behavior and mechanical properties of HyFlex EDM nickel-titanium endodontic rotary instrument: Evaluation at body temperature

Shunsuke Kimura, Arata Ebihara, Keiichiro Maki, Moe Sandar Kyaw, Yuka Kasuga, Satoshi Omori and Takashi Okiji
Journal of Dental Sciences 19 (2) 929 (2024)
https://doi.org/10.1016/j.jds.2023.07.039

Effects of Direct Aging Heat Treatments on the Superelasticity of Nitinol Produced via Laser Powder Bed Fusion

Maria Beatrice Abrami, Marialaura Tocci, Dermot Brabazon, Marcello Cabibbo and Annalisa Pola
Metallurgical and Materials Transactions A 55 (10) 3889 (2024)
https://doi.org/10.1007/s11661-024-07513-6

Akira Heima, Yuri Shinohara, Hiroshi Akamine, Minoru Nishida and Tomonari Inamura
(2023)
https://doi.org/10.2139/ssrn.4634847

NiTi Esaslı Saclara Uygulanan Farklı Çözündürme ve Yaşlandırma Isıl İşlemlerinin Metalografik ve Mekanik Özelliklere Etkileri

Sinan AKSÖZ, Rıdvan ARSLAN, Nimet KARDEŞ SEVER and Bülent BOSTAN
Politeknik Dergisi 26 (2) 693 (2023)
https://doi.org/10.2339/politeknik.979707

Comparative study on weld characterisation and corrosion performance of laser-welded NiTinol

Susmita Datta, Rajib Chakraborty, Mohammad Shahid Raza, Partha Saha and Dilip Kumar Pratihar
Science and Technology of Welding and Joining 28 (8) 792 (2023)
https://doi.org/10.1080/13621718.2023.2231255

Negative temperature-dependence of stress-induced R→B19′ transformation in nanocrystalline NiTi alloy

Taotao Wang, Xiangxiang Rao, Qiang Zhang, et al.
Materials Research Letters 11 (4) 250 (2023)
https://doi.org/10.1080/21663831.2022.2141587

Fatemeh Kordizadeh, Mohammad Elahinia and Shiva Mohajerani
(2023)
https://doi.org/10.2139/ssrn.4570804

Use of Dynamic Mechanical Analysers to Characterize Shape Memory Alloys: Cautions and Considerations from an Experimental Analysis

Zoroastro Torres Vilar, Estephanie Nobre Dantas Grassi, Henrique Martinni Ramos de Oliveira and Carlos José de Araujo
International Journal of Thermophysics 44 (9) (2023)
https://doi.org/10.1007/s10765-023-03249-4

Novel Ti–20Zr–49.7Pd High Temperature Shape Memory Alloy with Facilitated Detwinning and Precipitation Strengthening

Hirobumi Tobe, Shunsuke Kojima and Eiichi Sato
MATERIALS TRANSACTIONS 63 (7) 975 (2022)
https://doi.org/10.2320/matertrans.MT-M2022034

Microstructural Investigation of a FeMnAlNi Shape Memory Alloy Processed by Tungsten Inert Gas Wire and Arc Additive Manufacturing

Vincent Fabian Viebranz, Thomas Hassel and Hans Jürgen Maier
Metals 12 (10) 1731 (2022)
https://doi.org/10.3390/met12101731

Study on laser beam butt-welding of NiTinol sheet and input-output modelling using neural networks trained by metaheuristic algorithms

Susmita Datta, Amit Kumar Das, Mohammad Shahid Raza, Partha Saha and Dilip Kumar Pratihar
Materials Today Communications 32 104089 (2022)
https://doi.org/10.1016/j.mtcomm.2022.104089

Study on Buckling Characteristics of a Convex Tape-Shaped Ti-Ni Shape Memory Alloy Element for Application to Passive Vibration Isolator Devices and Force Limit Devices

Hiroki Cho, Sho Nagamatsu and Takumi Sasaki
Actuators 11 (3) 88 (2022)
https://doi.org/10.3390/act11030088

Effect of Heat Treatment on the Vibration Isolation Performance of Axially Symmetric NiTi Wire Mesh Damper

Yichuan Shao, Mingyang Su, Yaoqiang Wei, et al.
Symmetry 14 (10) 2209 (2022)
https://doi.org/10.3390/sym14102209

Small stress-hysteresis in a nanocrystalline TiNiCuFe alloy for elastocaloric applications over wide temperature window

Hui Zhang, Jinyi Liu, Zhiyuan Ma, et al.
Journal of Alloys and Compounds 928 167195 (2022)
https://doi.org/10.1016/j.jallcom.2022.167195

Structural evolution and thermal stability of functionally graded NiTi nano-glass thin films alloys during crystallization

Maryam Mohri, Farsad Forghani and Mahmoud Nili-Ahmadabadi
Materials Characterization 187 111850 (2022)
https://doi.org/10.1016/j.matchar.2022.111850

Low-energy irradiation induced giant quasilinear superelasticity over wide temperature range in NiTi shape memory alloys

Chuanxin Liang, Wenbo Liu, Hengfeng Gong and Dong Wang
Physical Review Materials 6 (4) (2022)
https://doi.org/10.1103/PhysRevMaterials.6.045602

Transformation behavior and superelasticity of TiZrHfNiCoCu multi-component high-temperature shape memory alloys

Izaz Ur Rehman, Shuanglei Li and Tae-Hyun Nam
Journal of Alloys and Compounds 884 161108 (2021)
https://doi.org/10.1016/j.jallcom.2021.161108

Effects of Cr and Sn additives on the martensitic transformation and deformation behavior of Ti-Cr-Sn biomedical shape memory alloys

Min Soo Park, Wan-Ting Chiu, Naoki Nohira, Masaki Tahara and Hideki Hosoda
Materials Science and Engineering: A 822 141668 (2021)
https://doi.org/10.1016/j.msea.2021.141668

Theoretical Analysis of Hysteresis and Characteristic Transition Temperatures of Iron-Based Memory Metals

V. Sampath, Sai Venkata Gayathri Ayyagari, R. Srinithi, et al.
Transactions of the Indian Institute of Metals 74 (3) 611 (2021)
https://doi.org/10.1007/s12666-020-02147-9

Latent heat storage capacity of NiTi shape memory alloy

Hiroyuki Kato
Journal of Materials Science 56 (13) 8243 (2021)
https://doi.org/10.1007/s10853-021-05777-6

Current technology in endodontic instrumentation: advances in metallurgy and manufacture

Faith Campbell, Joanne Cunliffe and James Darcey
British Dental Journal 231 (1) 49 (2021)
https://doi.org/10.1038/s41415-021-3170-1

The influence of hysteresis loop in a NiTi shape memory oscillator behavior

Hugo de Souza Oliveira and Aline Souza de Paula
Smart Materials and Structures 29 (10) 105033 (2020)
https://doi.org/10.1088/1361-665X/abb070

Temperature-dependence of superelastic stress in nanocrystalline NiTi with complete transformation capability

T. Wang, Z. Ma, X. Rao, et al.
Intermetallics 127 106970 (2020)
https://doi.org/10.1016/j.intermet.2020.106970

Optimization of Wire EDM Process Parameters for Medical Grade Nickel Titanium Shape Memory Alloy

Vinayak N Kulkarni, V N Gaitonde, K S Nalavade, Mrityunjay Doddamani and Gajanan M Naik
Strojnícky časopis - Journal of Mechanical Engineering 70 (1) 69 (2020)
https://doi.org/10.2478/scjme-2020-0007

Formation mechanism of Ni2Ti4O in NITI shape memory alloy

Wei-Yu Kai, Kai-Chun Chang, Hsu-Fu Wu, Shi-Wei Chen and An-Chou Yeh
Materialia 5 100194 (2019)
https://doi.org/10.1016/j.mtla.2018.100194

Corrosion behavior, in vitro and in vivo biocompatibility of a newly developed Ti–16Nb–3Mo–1Sn superelastic alloy

Yazan Al-Zain, Akiko Yamamoto, Jihad M. AlAjlouni, et al.
Materials Science and Engineering: C 104 109906 (2019)
https://doi.org/10.1016/j.msec.2019.109906

Investigations on Wire Electro Discharge Machining (WEDM) characteristics of NiTi Shape Memory Alloy

Vinayak N Kulkarni, V N Gaitonde, K S Nalavade and M S Patil
IOP Conference Series: Materials Science and Engineering 577 (1) 012078 (2019)
https://doi.org/10.1088/1757-899X/577/1/012078

Fabrication and Output Power Characteristics of a Pulley-type SMA Heat-engine Including the Idler Wheel with a Cooling System

T. Akagi, C. Nakagawa, Y. Takeda and H. Cho
Transactions of the Materials Research Society of Japan 43 (1) 23 (2018)
https://doi.org/10.14723/tmrsj.43.23

Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film

Maryam Mohri, Milad Taghizadeh, Di Wang, Horst Hahn and Mahmoud Nili-Ahmadabadi
Materials Characterization 135 317 (2018)
https://doi.org/10.1016/j.matchar.2017.11.056

Effects of Heating and Cooling Cycle on the Shape Memory and Mechanical Characteristics of Tape-shaped Shape Memory Alloy Element

C. Nakagawa and H. Cho
Transactions of the Materials Research Society of Japan 43 (1) 19 (2018)
https://doi.org/10.14723/tmrsj.43.19

Effect of Heat Treatment on Repetitively Scanned SLM NiTi Shape Memory Alloy

Zhong Xun Khoo, Jia An, Chee Kai Chua, Yu Fang Shen, Che Nan Kuo and Yong Liu
Materials 12 (1) 77 (2018)
https://doi.org/10.3390/ma12010077

Shaping Ability of Superelastic and Controlled Memory Nickel-Titanium File Systems: An In Vitro Study

Raidan A. Ba-Hattab and Dieter Pahncke
International Journal of Dentistry 2018 1 (2018)
https://doi.org/10.1155/2018/6050234

Texture, aging, and superelasticity of selective laser melting fabricated Ni-rich NiTi alloys

Soheil Saedi, Ali Sadi Turabi, Mohsen Taheri Andani, et al.
Materials Science and Engineering: A 686 1 (2017)
https://doi.org/10.1016/j.msea.2017.01.008

Advances in Shape Memory Materials

Hiroki Cho, Yuji Takeda and Toshio Sakuma
Advanced Structured Materials, Advances in Shape Memory Materials 73 1 (2017)
https://doi.org/10.1007/978-3-319-53306-3_1

Effect of Cold Work and Partial Annealing on Thermomechanical Behaviour of Ti-50.5at%Ni

Abdus Samad Mahmud, Zhigang Wu, Hong Yang and Yinong Liu
Shape Memory and Superelasticity 3 (1) 57 (2017)
https://doi.org/10.1007/s40830-017-0103-6

Novel method to analyse tensile properties of ultra-fine NiTi wires with a visual extensometer

A. Michael, Y.N. Zhou and M.I. Khan
Materials Letters 182 177 (2016)
https://doi.org/10.1016/j.matlet.2016.06.081

Effect of indentation temperature on nickel-titanium indentation-induced two-way shape-memory surfaces

Stephan A. Brinckmann, Mareike Frensemeier, Christopher M. Laursen, Hans J. Maier, Dominik Britz, Andreas S. Schneider, Frank Mücklich and Carl P. Frick
Materials Science and Engineering: A 675 253 (2016)
https://doi.org/10.1016/j.msea.2016.08.036

(2016)
https://doi.org/10.12794/metadc849732

A stabilized, high stress self-biasing shape memory alloy actuator

B Panton, Y N Zhou and M I Khan
Smart Materials and Structures 25 (9) 095027 (2016)
https://doi.org/10.1088/0964-1726/25/9/095027

Jun Cui
198 289 (2014)
https://doi.org/10.1007/978-3-642-55375-2_12

The influence of heat treatment on the mechanical properties of Ni-Ti file materials

Kana MIYARA, Yoshio YAHATA, Yohsuke HAYASHI, et al.
Dental Materials Journal 33 (1) 27 (2014)
https://doi.org/10.4012/dmj.2013-196

Basic Research and Development of Shape Memory Alloys

Shuichi Miyazaki
Materia Japan 53 (5) 197 (2014)
https://doi.org/10.2320/materia.53.197

Elastic Limit of Fe–Pd Alloys Exhibiting Lattice Softening

Fei Xiao, Takashi Fukuda and Tomoyuki Kakeshita
ISIJ International 54 (6) 1374 (2014)
https://doi.org/10.2355/isijinternational.54.1374

Surface Stoichiometry and Oxidation of NiTi

Jian Xin Zhu, Da Wei Jin, Jian Zhang and Hong Liang Zhao
Applied Mechanics and Materials 307 387 (2013)
https://doi.org/10.4028/www.scientific.net/AMM.307.387

Research and Development of Ti-Ni-base Shape Memory Alloys

Shuichi Miyazaki
Materia Japan 51 (5) 209 (2012)
https://doi.org/10.2320/materia.51.209

Fatigue crack initiation and propagation of a TiNi shape memory alloy

A.-L. Gloanec, P. Cerracchio, B. Reynier, A. Van Herpen and P. Riberty
Scripta Materialia 62 (10) 786 (2010)
https://doi.org/10.1016/j.scriptamat.2010.02.001

New method for improving properties of SMA coil springs

K. K. Jee, J. H. Han, Y. B. Kim, D. H. Lee and W. Y. Jang
The European Physical Journal Special Topics 158 (1) 261 (2008)
https://doi.org/10.1140/epjst/e2008-00685-y

Effect of Rotation Speed on Transformation Behavior in Ti-48at%Ni Shape Memory Alloy Melt-Spun Ribbon

Hong Yan Xing, Hee Young Kim and Shuichi Miyazaki
Materials Science Forum 561-565 1481 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.561-565.1481

TiNi-Base and Ti-Base Shape Memory Alloys

Shuichi Miyazaki and Hee Young Kim
Materials Science Forum 561-565 5 (2007)
https://doi.org/10.4028/www.scientific.net/MSF.561-565.5

Superelasticity in a New BioImplant Material: Ni-rich 55NiTi Alloy

R. R. Adharapurapu and K. S. Vecchio
Experimental Mechanics 47 (3) 365 (2007)
https://doi.org/10.1007/s11340-006-9004-x

Superelastic Property of Ti-Ni Alloy Produced by Casting After SHS

Kazuhiro Kitamura, Toshio Kuchida, Tadashi Inaba, Masataka Tokuda and Yukiharu Yoshimi
MATERIALS TRANSACTIONS 47 (11) 2867 (2006)
https://doi.org/10.2320/matertrans.47.2867

Infrared Brazing Ti₅₀Ni₅₀ and Ti–6Al–4V Using the BAg-8 Braze Alloy

Ren-Haur Shiue and Shyi-Kaan Wu
MATERIALS TRANSACTIONS 46 (9) 2057 (2005)
https://doi.org/10.2320/matertrans.46.2057

Characterization of High-Speed Microactuator Utilizing Shape Memory Alloy Thin Films

M. Tomozawa, K. Okutsu, Hee Young Kim and Shuichi Miyazaki
Materials Science Forum 475-479 2037 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.475-479.2037

Effect of Ni-Content on Shape Memory Behavior of Ti-Rich Ti-Ni Melt-Spun Ribbons

Hongyang Xing, Anak Khantachawana, Hee Young Kim and Shuichi Miyazaki
Materials Science Forum 475-479 1925 (2005)
https://doi.org/10.4028/www.scientific.net/MSF.475-479.1925

Texture and Microstructure of Ti-Ni Melt-Spun Shape Memory Alloy Ribbons

Anak Khantachawana, Hiroshi Mizubayashi and Shuichi Miyazaki
MATERIALS TRANSACTIONS 45 (2) 214 (2004)
https://doi.org/10.2320/matertrans.45.214

Texture Analysis and Properties of Rapidly Solidified Ti₅₂Ni₃₈Cu₁₀ Shape Memory Alloy

Venky Saravanan, Anak Khantachawana and Shuichi Miyazaki
MATERIALS TRANSACTIONS 45 (2) 208 (2004)
https://doi.org/10.2320/matertrans.45.208

Shock synthesis and characterization of ultrafine grained NiTi shape memory alloy

Xiao Xu and Naresh N Thadhani
Scripta Materialia 44 (10) 2477 (2001)
https://doi.org/10.1016/S1359-6462(01)00920-4

Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys

S.K Wu, H.C Lin and S.H Chen
Materials Chemistry and Physics 68 (1-3) 149 (2001)
https://doi.org/10.1016/S0254-0584(00)00348-5

Microstructure in the cubic to trigonal transition

Kevin F. Hane and Thomas W. Shield
Materials Science and Engineering: A 291 (1-2) 147 (2000)
https://doi.org/10.1016/S0921-5093(00)00952-7

Texture of Ti–Ni rolled thin plates and sputter-deposited thin films

S. Miyazaki, V.H. No, K. Kitamura, A. Khantachawana and H. Hosoda
International Journal of Plasticity 16 (10-11) 1135 (2000)
https://doi.org/10.1016/S0749-6419(00)00004-8

The Electrical Transport Properties of Shape Memory Alloys Under a Stress State

G. Airoldi and M. Pozzi
Journal of Engineering Materials and Technology 121 (1) 108 (1999)
https://doi.org/10.1115/1.2815992

A study on the machinability of a Ti49.6Ni50.4 shape memory alloy

S.K Wu, H.C Lin and C.C Chen
Materials Letters 40 (1) 27 (1999)
https://doi.org/10.1016/S0167-577X(99)00044-0

Energetic evaluation for inducing the thermoelastic martensitic transformation by mechanical stress in Cu–Zn–Al single crystals

F.J Gil and J.M Guilemany
Intermetallics 7 (6) 699 (1999)
https://doi.org/10.1016/S0966-9795(98)00086-7

The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part I—Aged Microstructure and Micro-Mechanical Modeling

Ken Gall, Huseyin Sehitoglu, Yuriy I. Chumlyakov, Irina V. Kireeva and Hans J. Maier
Journal of Engineering Materials and Technology 121 (1) 19 (1999)
https://doi.org/10.1115/1.2815993

The Nature of Reversible Change in M_s Temperatures of Ti–Ni Alloys with Alternating Aging

Jinsong Zhang, Wei Cai, Xiaobing Ren, Kazuhiro Otsuka and Makoto Asai
Materials Transactions, JIM 40 (12) 1367 (1999)
https://doi.org/10.2320/matertrans1989.40.1367

Microstructure and Mechanical Properties of Sputter-Deposited Ti-Ni Alloy Thin Films

A. Ishida and S. Miyazaki
Journal of Engineering Materials and Technology 121 (1) 2 (1999)
https://doi.org/10.1115/1.2815996

The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part II—Discussion of Experimental Results

Ken Gall, Huseyin Sehitoglu, Yuriy I. Chumlyakov, Irina V. Kireeva and Hans J. Maier
Journal of Engineering Materials and Technology 121 (1) 28 (1999)
https://doi.org/10.1115/1.2815995

Recent developments in the research of shape memory alloys

Kazuhiro Otsuka and Xiaobing Ren
Intermetallics 7 (5) 511 (1999)
https://doi.org/10.1016/S0966-9795(98)00070-3

In Vitro Thermomechanical Ageing of Ni-Ti Alloys

F. J. Gil and J. A. Planell
Journal of Biomaterials Applications 12 (3) 237 (1998)
https://doi.org/10.1177/088532829801200304

Structural Control: Past, Present, and Future

G. W. Housner, L. A. Bergman, T. K. Caughey, et al.
Journal of Engineering Mechanics 123 (9) 897 (1997)
https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897)

Microstructure of TiNi shape-memory alloy synthesized by explosive shock-wave compression of Ti–Ni powder mixture

XIAODONG HAN, WENHUI ZOU, RENHUI WANG, SING JIN, ZE ZHANG, TONGCHUN LI and DAZHI YANG
Journal of Materials Science 32 (17) 4723 (1997)
https://doi.org/10.1023/A:1018622728936

Martensitic Transformations in Sputter-Deposited Shape Memory Ti–Ni Films

A. Gyobu, Y. Kawamura, H. Horikawa and T. Saburi
Materials Transactions, JIM 37 (4) 697 (1996)
https://doi.org/10.2320/matertrans1989.37.697

S. Miyazaki and K. Nomura
176 (1994)
https://doi.org/10.1109/MEMSYS.1994.555619

Characteristics of Deformation and Transformation in Ti₄₄Ni₄₇Nb₉ Shape Memory Alloy

Min Piao, Shuichi Miyazaki and Kazuhiro Otsuka
Materials Transactions, JIM 33 (4) 346 (1992)
https://doi.org/10.2320/matertrans1989.33.346

Nucleation and Self-Accommodation of the R-Phase in Ti–Ni Alloys

Takashi Fukuda, Toshio Saburi, Kenji Doi and Soji Nenno
Materials Transactions, JIM 33 (3) 271 (1992)
https://doi.org/10.2320/matertrans1989.33.271

Effect of Thermo-mechanical Treatment on Shape Memory Characteristics in a Ti-40Ni-10Cu (at%) Alloy

Tae Hyun Nam, Toshio Saburi and Ken’ichi Shimizu
Materials Transactions, JIM 32 (9) 814 (1991)
https://doi.org/10.2320/matertrans1989.32.814

Engineering Aspects of Shape Memory Alloys

Rohit C.L. Sachdeva and Shuichi Miyazaki
Engineering Aspects of Shape Memory Alloys 452 (1990)
https://doi.org/10.1016/B978-0-7506-1009-4.50042-1

Effect of Heat Treatment after Cold Working on the Phase Transformation in TiNi Alloy

Tsunehiko Todoroki and Hirokazu Tamura
Transactions of the Japan Institute of Metals 28 (2) 83 (1987)
https://doi.org/10.2320/matertrans1960.28.83

Article cité par

Article cité :

CHARACTERISTICS OF DEFORMATION AND TRANSFORMATION PSEUDOELASTICITY IN Ti-Ni ALLOYS

Citations de cet article :